Fortinet NSE8_812 Exam Study Guide, Valuable NSE8_812 Feedback

For all of you, it is necessary to get the Fortinet certification to enhance your career path. ExamDiscuss is the leading provider of its practice exams, study guides and online learning courses, which may can help you. For example, the NSE8_812 practice dumps contain the comprehensive contents which relevant to the actual test, with which you can pass your NSE8_812 Actual Test with high score. Besides, you can print the NSE8_812 study torrent into papers, which can give a best way to remember the questions. We guarantee full refund for any reason in case of your failure of NSE8_812 test.

Fortinet NSE8_812 exam is an advanced level certification exam that is designed to test the skills of experienced network security professionals. NSE8_812 exam is part of the Fortinet Network Security Expert (NSE) program, which is a comprehensive training and certification program that is designed to develop the skills and knowledge of network security professionals. The NSE8_812 exam is focused on testing the knowledge and skills of candidates in the areas of network security architecture, design, and implementation.

Fortinet NSE8_812 certification exam is designed for professionals who want to validate their expertise in advanced network security concepts and technologies. Fortinet is a leading provider of cybersecurity solutions and the NSE8_812 exam is part of their NSE program, which is a comprehensive training and certification program for network security professionals. The NSE8_812 Exam is the highest level exam in the NSE program and it covers a wide range of topics related to network security.

Fortinet NSE8_812 certification is recognized globally as a mark of proficiency in advanced network security. Fortinet NSE 8 - Written Exam (NSE8_812) certification is particularly useful for network security professionals who are responsible for designing, implementing, and managing complex security infrastructures for large organizations. With the NSE 8 certification, professionals can demonstrate their expertise in advanced network security and gain a competitive advantage in their careers.

>> Fortinet NSE8_812 Exam Study Guide <<

NSE8_812 Guide Torrent and NSE8_812 Study Tool - NSE8_812 Exam Torrent

It is possible for you to easily pass NSE8_812 exam. Many users who have easily pass NSE8_812 exam with our NSE8_812 exam software of ExamDiscuss. You will have a real try after you download our free demo of NSE8_812 Exam software. We will be responsible for every customer who has purchased our product. We ensure that the NSE8_812 exam software you are using is the latest version.

Fortinet NSE 8 - Written Exam (NSE8_812) Sample Questions (Q60-Q65):

NEW QUESTION # 60
Refer to the exhibit.

A customer has deployed a FortiGate 200F high-availability (HA) cluster that contains & TPM chip. The exhibit shows output from the FortiGate CLI session where the administrator enabled TPM.
Following these actions, the administrator immediately notices that both FortiGate high availability (HA) status and FortiManager status for the FortiGate are negatively impacted.
What are the two reasons for this behavior? (Choose two.)

A. TPM functionality is not yet compatible with FortiGate HA D The administrator needs to manually enter the hex private data encryption key in FortiManager
B. The FortiGate has not finished the auto-update process to synchronize the new configuration to FortiManager yet.
C. The private-data-encryption key entered on the primary did not match the value that the TPM expected.
D. Configuration for TPM is not synchronized between FortiGate HA cluster members.

Answer: C,D

Explanation:
The two reasons for the negative impact on the FortiGate HA status and FortiManager status after enabling TPM are:
The private-data-encryption key entered on the primary unit did not match the value that the TPM expected. This could happen if the TPM was previously enabled and then disabled, and the key was changed in between. The TPM will reject the new key and cause an error in the configuration synchronization.
Configuration for TPM is not synchronized between FortiGate HA cluster members. Each cluster member must have the same private-data-encryption key to form a valid HA cluster and synchronize their configurations. However, enabling TPM on one unit does not automatically enable it on the other units, and the key must be manually entered on each unit. To resolve these issues, the administrator should disable TPM on all units, clear the TPM data, and then enable TPM again with the same private-data-encryption key on each unit. References: https://docs.fortinet.com/document/fortigate/6.4.0/cookbook/103437/inbound-ssl-inspection https://docs.fortinet.com/document/fortigate/6.4.0/cookbook/103438/application-detection-on-ssl-offloaded-traffic

NEW QUESTION # 61
Refer to the exhibit, which shows a multi-region SD-WAN architecture.

Given this scenario, which two statements are true? (Choose two.)

A. If iBGP is used, cross-regional spoke-to-hub shortcuts can be established.
B. If iBGP is used, cross-regional spoke-to-hub shortcuts cannot be used.
C. If eBGP is used, ADVPN can be established for branch-to-branch traffic across regions.
D. If eBGP is used, ADVPN can be established only for branch-to-branch traffic within each region.

Answer: D

NEW QUESTION # 62
You deployed a fully loaded FG-7121F in the data center and enabled sslvpn-load-balance. Based on the behavior of this feature which statement is correct?

A. To have better traffic distribution you should use IP pools that increment in multiples of 12.
B. You can use src-ip or dst-ip-dport on dp-load-distribution-method to make SSL VPN load balancing work as expected.
C. If an FPM goes down, SSL VPN IP pool IP addresses will be re-allocated to the remaining FPMs.
D. Enabling SSL VPN load balancing will clear the session table.

Answer: B

NEW QUESTION # 63
Refer to the exhibits.

A customer is looking for a solution to authenticate the clients connected to a hardware switch interface of a FortiGate 400E.
Referring to the exhibits, which two conditions allow authentication to the client devices before assigning an IP address? (Choose two.)

A. FortiGate devices with NP6 and hardware switch interfaces cannot support 802.1X authentication.
B. Client devices must have 802 1X authentication enabled
C. Devices connected directly to ports 3 and 4 can perform 802 1X authentication.
D. Ports 3 and 4 can be part of different switch interfaces.

Answer: B,C

Explanation:
The customer wants to deploy a solution to authenticate the clients connected to a hardware switch interface of a FortiGate 400E device. A hardware switch interface is an interface that combines multiple physical interfaces into one logical interface, allowing them to act as a single switch with one IP address and one set of security policies. The customer wants to use 802.1X authentication for this solution, which is a standard protocol for port-based network access control (PNAC) that authenticates clients based on their credentials before granting them access to network resources. One condition that allows authentication to the client devices before assigning an IP address is that devices connected directly to ports 3 and 4 can perform 802.1X authentication. This is because ports 3 and 4 are part of the hardware switch interface named "lan", which has an IP address of 10.10.10.254/24 and an inbound SSL inspection profile named "ssl-inspection". The inbound SSL inspection profile enables the FortiGate device to intercept and inspect SSL/TLS traffic from clients before forwarding it to servers, which allows it to apply security policies and features such as antivirus, web filtering, application control, etc. However, before performing SSL inspection, the FortiGate device needs to authenticate the clients using 802.1X authentication, which requires the clients to send their credentials (such as username and password) to the FortiGate device over a secure EAP (Extensible Authentication Protocol) channel. The FortiGate device then verifies the credentials with an authentication server (such as RADIUS or LDAP) and grants or denies access to the clients based on the authentication result. Therefore, devices connected directly to ports 3 and 4 can perform 802.1X authentication before assigning an IP address. Another condition that allows authentication to the client devices before assigning an IP address is that client devices must have 802.1X authentication enabled. This is because 802.1X authentication is a mutual process that requires both the client devices and the FortiGate device to support and enable it. The client devices must have 802.1X authentication enabled in their network settings, which allows them to initiate the authentication process when they connect to the hardware switch interface of the FortiGate device. The client devices must also have an 802.1X supplicant software installed, which is a program that runs on the client devices and handles the communication with the FortiGate device using EAP messages. The client devices must also have a trusted certificate installed, which is used to verify the identity of the FortiGate device and establish a secure EAP channel. Therefore, client devices must have 802.1X authentication enabled before assigning an IP address. Reference: https://docs.fortinet.com/document/fortigate/7.0.0/administration-guide/19662/hardware-switch-interfaces https://docs.fortinet.com/document/fortigate/7.0.0/administration-guide/19662/802-1x-authentication

NEW QUESTION # 64
Refer to the exhibit, which shows the high availability configuration for the FortiAuthenticator (FAC1).

Based on this information, which statement is true about the next FortiAuthenticator (FAC2) member that will join an HA cluster with this FortiAuthenticator (FAC1)?

A. FAC2 can only process requests when FAC1 fails.
B. The FortiToken license will need to be installed on the FAC2.
C. FAC2 can have its HA interface on a different network than FAC1.
D. FSSO sessions from FAC1 will be synchronized to FAC2.

Answer: D

Explanation:
When FortiAuthenticator operates in cluster mode, it provides active-passive failover and synchronization of all configuration and data, including FSSO sessions, between the cluster members. Therefore, if FAC1 is the active unit and FAC2 is the standby unit, any FSSO sessions from FAC1 will be synchronized to FAC2. If FAC1 fails, FAC2 will take over the active role and continue to process the FSSO sessions. References: https://docs.fortinet.com/document/fortiauthenticator/6.1.2/administration-guide/122076/high-availability

NEW QUESTION # 65
......

Before joining any platform, the Fortinet NSE8_812 exam applicant has a number of reservations. They want NSE8_812 Questions that satisfy them and help them prepare successfully for the NSE8_812 exam in a short time. Studying with Fortinet NSE8_812 Questions that aren't real results in failure and loss of time and money. The ExamDiscuss offers updated and real Fortinet NSE8_812 questions that help students crack the NSE8_812 test quickly.

Valuable NSE8_812 Feedback: https://www.examdiscuss.com/Fortinet/exam/NSE8_812/