D-PST-MN-A-24 Questions, D-PST-MN-A-24 Certification Torrent

Our D-PST-MN-A-24 real exam helps you not only to avoid all the troubles of learning but also to provide you with higher learning quality than other students'. At the same time, our D-PST-MN-A-24 exam materials have been kind enough to prepare the App version for you, so that you can download our D-PST-MN-A-24 practice prep to any electronic device, and then you can take all the learning materials with you and review no matter where you are.

EMC D-PST-MN-A-24 Exam Syllabus Topics:

Topic	Details
Topic 1	PowerStore Implementation: This segment delves into the implementation of PowerStore networks. It examines Ethernet switching, network requirements, and configuration options.
Topic 2	Troubleshooting: In this section of the exam, the focus is on troubleshooting techniques for PowerStore systems. It includes interpreting hardware fault LEDs, using PowerStore Manager alerts for diagnostics, and employing the PowerStore Command Line Interface (PSTCLI) for troubleshooting.
Topic 3	PowerStore Installation: This portion of the exam explores the comprehensive installation process for PowerStore systems. It covers critical aspects such as racking considerations, power, and environmental prerequisites.
Topic 4	Software Upgrades: In this part of the exam, the topics covered include software upgrade types for PowerStore systems. It details the process of performing non-disruptive upgrades (NDU) and describes the operational steps involved in NDUs.

>> D-PST-MN-A-24 Questions <<

Free PDF Quiz 2025 High Pass-Rate EMC D-PST-MN-A-24 Questions

The clients can try out and download our D-PST-MN-A-24 study materials before their purchase. They can immediately use our D-PST-MN-A-24 training guide after they pay successfully. Our expert team will update the study materials periodically to make sure that our worthy customers can always have the latest and valid information. And if the clients encounter the problems in the course of using our D-PST-MN-A-24 Learning Engine, our online customer service staff will enthusiastically solve their problems.

EMC Dell PowerStore Maintenance Achievement Sample Questions (Q14-Q19):

NEW QUESTION # 14
How is a service laptop IP configured to connect to the Service LAN port of a Dell EMC PowerStore node?

A. Obtain IP address from DHCP on PowerStore
B. Static IP: 169.254.1.249 and netmask: 255.0.0.0
C. Static IP: 128.221.1.249 and netmask: 255.255.255.0
D. Leave IP address and netmask unconfigured

Answer: C

Explanation:
To connect a service laptop to the Service LAN port of a Dell EMC PowerStore node, the laptop's Ethernet interface should be configured with a static IP address and netmask. The correct configuration is:
IP: 128.221.1.249
Netmask: 255.255.255.0
Gateway: None1
This configuration allows the service laptop to communicate with the PowerStore nodes for SSH and PowerStore Manager (UI) access. It's important to note that the laptop can be physically connected to one of the PowerStore nodes at a time, or to both nodes' Service LAN ports using a small switch or hub. However, multiple appliances should never be connected to the same hub or switch as the nodes use the same internal IPs1.
Once the IP is configured as shown above and the physical connection is established, you can ping the relevant IPs:
Node A: 128.221.1.250
Node B: 128.221.1.251
You should only be able to ping the IPs where you are physically connected to. If you can ping, you can proceed to use SSH to connect to the IPs over port 22 using your preferred SSH client. For file transfers, SCP protocol must be used1.
For more detailed instructions on how to connect to the system over the Service LAN Ports for SSH and PowerStore Manager access, refer to the Dell Support Knowledge Base Article1.

NEW QUESTION # 15
What is the protocol used for the storage network?

A. FC
B. iSCSI
C. NFS
D. SMB

Answer: A

Explanation:
The protocol used for the storage network in Dell PowerStore systems is Fibre Channel (FC). FC is a high-speed network technology primarily used for storage networking. Dell PowerStore utilizes FC as part of its all-NVMe design, which also includes NVMe-over-fabric networking to deliver low latency performance for storage workloads1.
Fibre Channel provides several benefits for storage networks, including:
High throughput and low latency for storage operations.
Support for long-distance networking, which is beneficial for disaster recovery and remote backups.
A mature and widely supported ecosystem with a variety of hardware and software options.
For detailed information on configuring and using FC with Dell PowerStore, administrators should refer to the Dell PowerStore Networking Guide for Storage Services and the Dell PowerStore Best Practices Guide. These documents provide comprehensive instructions on network configurations, including best practices for setting up and managing FC networks within Dell PowerStore environments23. Following these guidelines ensures optimal performance and reliability of the storage network.

NEW QUESTION # 16
Refer to the Exhibit.

What is the result of the network configuration shown for a Dell EMC PowerStore T node A management port?

A. VLAN 1 and VLAN 1501 pass tagged traffic
B. VLAN 1 passes tagged traffic, VLAN 1501 passes untagged traffic
C. VLAN 1 and VLAN 1501 pass untagged traffic
D. VLAN 1 passes untagged traffic, VLAN 1501 passes tagged traffic

Answer: D

Explanation:
The network configuration shown for a Dell EMC PowerStore T node A management port indicates that VLAN 1 is set as the access VLAN, which means it will pass untagged traffic. The port is also configured as a trunk port, which allows it to pass traffic from multiple VLANs, but only VLAN 1501 is specified in the allowed list, meaning it will pass as tagged traffic. This configuration is typical for network interfaces on storage systems where management traffic is separated from other types of traffic for security and performance reasons.
In detail, the configuration commands are:
switchport access vlan 1: Sets VLAN 1 as the access VLAN, which passes untagged traffic.
switchport mode trunk: Enables trunking on the port, allowing it to pass traffic from multiple VLANs.
switchport trunk allowed vlan 1501: Specifies that only VLAN 1501 traffic is allowed on the trunk and will be tagged.

NEW QUESTION # 17
The "svc_rescue_state list" shows a node in service mode. How can the node be returned to normal mode?

A. svc_rescue_state clear
B. svc_rescue_state quit
C. svc_rescue_state normal
D. svc_rescue_state exit

Answer: A

Explanation:
To return a node from service mode to normal mode in a Dell EMC PowerStore system, the svc_rescue_state clear command should be used. This command clears the service mode state of the node and prepares it to return to normal operational mode1.
Here are the steps to perform this action:
Log in to the appliance from an SSH client.
Run the svc_rescue_state clear command to clear the boot mode.
Then, run the svc_node reboot command to reboot the node and return it to normal mode.
After the reboot, you can verify that the node has returned to normal mode by running the svc_rescue_state list command again.
It is important to follow these steps carefully to ensure that the node transitions back to normal mode without any issues. For more detailed instructions or if you encounter any problems during this process, refer to the Dell EMC PowerStore Service Scripts Guide or contact Dell EMC Support for assistance1.

NEW QUESTION # 18
What does the output of the command "svc_diag list -- basic" show?

A. Boot mode
B. License status
C. Failover status
D. Service tag

Answer: D

Explanation:
The output of the command "svc_diag list - basic" on a Dell PowerStore system typically shows service tag information.
The "svc_diag" command is part of the service scripts provided by Dell for diagnostic purposes on PowerStore systems.
The "list" option with the "-basic" flag is used to display a list of basic system information, which usually includes the service tag, among other details.
The service tag is a unique identifier for Dell products that is used for various purposes, including support and maintenance.
While the exact output of the command can vary based on the software version and specific system configuration, the service tag is a common piece of information displayed by such diagnostic commands1.
For the most accurate and up-to-date information about the "svc_diag list - basic" command and its output, it is recommended to consult the Dell PowerStore Service Scripts Guide or contact Dell Support directly.

NEW QUESTION # 19
......

Our passing rate is very high to reach 99% and our D-PST-MN-A-24 exam torrent also boost high hit rate. Our D-PST-MN-A-24 study questions are compiled by authorized experts and approved by professionals with years of experiences. They are compiled according to the latest development conditions in the theory and practice and the questions and answers are based on real exam. Our D-PST-MN-A-24 study questions are linked tightly with the exam papers in the past and conform to the popular trend in the industry. Our product convey you more important information with less amount of the questions and answers. Thus we can be sure that our D-PST-MN-A-24 guide torrent are of high quality and can help you pass the exam with high probability.

D-PST-MN-A-24 Certification Torrent: https://www.testvalid.com/D-PST-MN-A-24-exam-collection.html